Join the WiFi network using the WPS method The WAX204’s WPS button is on the back panel.
The default WiFi network name (SSID) is NETGEARXXXXXX, where XXXXXX represents the last 6 characters of the WAX204s MAC Address.Įnter the default passphrase printed on the WAX204 label. Find and select the WAX204’s WiFi network name (SSID) and connect to its WiFi network.
This utility scans for all WiFi networks in your area.Ģ. Open the software utility that manages your WiFi connections on the A wiFi-enabled computer that you want to connect to the WAX204. Join the WiFi network using the manual methodġ. To connect your WiFi-enabled computer to the WAX204’s WiFi network, you can use either the manual method or the Wi-Fi Protected Setup (WPS) method. For more information, see the user manual. We recommend that you change the WiFi password to a more secure password for the default SSID and for the two other SSIDs. A randomly generated, unique WiFi password is printed on the device label. By default, the WAX204’s WiFi network provides WPA2 security. The default WiFi network name (SSID) is NETGEARXXXXXX, where XXXXXX represents the last 6 characters of the device’s MAC Address, as printed on the WAX204 label. Power on the WAX204 and check that the LEDs are lit. (If the modem uses a battery backup, put the battery back in before you turn on the modem.)ĥ. Connect the other end of the cable to a LAN port on your modem.Ĥ. Connect the Ethernet cable to the yellow Internet port on the WAX204.ģ. (If the modem uses a battery backup, remove the battery.)Ģ. Unplug the modem’s power, leaving the modem connected to the wall jack for your Internet service. Problems can arise when your hardware device is too old or not supported any longer.1. This will help if you installed an incorrect or mismatched driver. Try to set a system restore point before installing a device driver. It is highly recommended to always use the most recent driver version available. Fixed “WNDR3700 locks up when a USB hard drive is connected, if there are many pictures and video files.” Enable ReadyShare Internet access via http with default port 80, it still allows users to add port forward rule using port 80.” Fixed “ReadyShare Internet access - Enable ReadyShare Internet access via ftp with default port 21, it still allows users to add port forward rule using port 21. Fixed “A conflict DNS address is assigned by DHCP server (IP address is not conflict) from WAN side of WNDR3700 automatically, and it won’t be found as an IP conflict.” Fixed “DNS SRV records are not being handled properly. Fixed “WiFi gets disabled when guest account or WDS is enabled only if the MAC address starts with non-zero.” The record time interval of statistics data in traffic meter is changed to one second. Smart Wizard CD version 2.2 adds MAC OSX support.
0 kommentar(er)
